irori table
In Japan, Paulownia wood has been used for chest of drawers since ancient times.
Craftsmen have created masterpieces from wood that was carefully selected.
Here is the Highest class IRORI by the technique that has been making Paulownia wood furniture.

Various IRORI

IRORI dining table made of Paulownia wood fired on surface
IRORI dining table made of Paulownia wood fired on surface
Size W110-200cm, D110-120cm, H75-65cm
[Each table is a made-to-order, so price depends on its WIDTH size.Size W110-200cm]
We used a single Paulownia wooden plate (70mm thick) air-dried thoroughly, and we kept natural grains as much as possible.
Its surface was burned till it become black, then UZUKURI finish (brushing with a tool made of bundled roots of Themeda triandra) and waterproof finish. So, it is difficult to absorb the moisture, and almost can not stain.
You can use this table in safety because we use a clean and heat-resistant Stainless steel for RO, the center of the table. As there is a hole for power code, you can use induction heater, electric griddle and gas stove.
It becomes an ordinary table when you cover RO with a lid of accessories if you don’t need RO.It is easy to assemble the table.With two drawers.
If you remove the legs, the table becomes a low table.
We offer KAWAZUNA (river sand), KIRIBAI (ash of Paulownia wood) and heat-resistant tile.


 
Egg-shaped IRORI dining table with wedge clamp made of Paulownia wood fired on surface
Egg-shaped IRORI dining table made of Paulownia wood fired on surface
Size W135, D110, H75-65cm
Overlapped wooden plates (60mm thick) for the top of the table.
Its surface was burned, then UZUKURI finish (brushing with a tool made of bundled roots of Themeda triandra) and waterproof finish.
As there is a hole for power code, you can use induction heater, electric griddle and gas stove.
It becomes an ordinary table when you cover the center of the table, called RO with a lid of accessories if you don’t need RO.
It is easy to assemble the table. Top panel, the upper leg, lower leg can be disassembled and easily be moved.
We offer KAWAZUNA (river sand), KIRIBAI (ash of Paulownia wood) and heat-resistant tile.
 


 
Well-shaped (shaped like a square) IRORI dining table made of Paulownia wood fired on surface
Well-shaped (shaped like a square) IRORI dining table made of Paulownia wood fired on surface
For 2 – 4 persons
Size W92, D92, H72-65cm
Material : Paulownia wood, ginkgo trees
We used a single plate for the top of the table, and joined by four tenons and mortises.
With one drawer.
!!! You can choose between “WITH caster“ or “WITHOUT caster”.


 
Palette-shaped IRORI dining table made of Paulownia wood fired on surface
 Palette-shaped IRORI dining table made of Paulownia wood fired on surface
For 6 – 8 persons
Size W135, D110, H72-65cm
Material : Paulownia wood, ginkgo trees
 
 


 
Regular Octagonal IRORI dining table made of Paulownia wood fired on surfaceRegular Octagonal IRORI dining table made of Paulownia wood fired on surface
For 2 – 4 persons
Size W100, D100, H72-65cm
Material : Paulownia wood, ginkgo trees
With two drawers.
 
 


 
Perfect circular IRORI dining table made of Paulownia wood fired on surface
Perfect circular IRORI dining table made of Paulownia wood fired on surface
For 2 – 4 persons
Size W110, D110, H72-65cm
Material : Paulownia wood, ginkgo trees
With two drawers.
 
>> Go to IRORI site